This post contains Amazon affiliate links.
Introduction
Welcome to our review of the ABN Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover. This tool is designed to assist in removing stuck common-rail diesel injectors quickly and safely without the need to dismantle the cylinder head.
Why You Need This Tool
Fuel injectors play a crucial role in injecting fuel directly into the cylinder. However, due to continuous use, they are prone to cracks, breaks, and wear. These issues can manifest in various symptoms such as rough engine idle, slow acceleration, misfires, poor gas mileage, and gas leaks. This is where the ABN Diesel Injector Puller Tool comes in handy.
Features and Compatibility
This injector puller tool is great for both Bosch and Lucas injectors. It includes a 7-inch bar and a 1.3 lb slap hammer weight, offering enough force to remove stubborn injectors. The kit also comes with M8, M12, and M14 thread adapters, providing compatibility with a wide range of injectors.
Durable Construction for Longevity
Crafted from strong, durable steel, this tool is built to withstand the toughest fuel injector removal jobs. The steel rod with two threaded ends increases pulling strength and force, ensuring longevity.
Ease of Use and Efficiency
Using this tool is easy and straightforward. Simply attach the tool to the injector you wish to remove and then give a sharp yank on the weight towards the handle. The force transfers to the shaft, pulling the attached end and injector in the desired direction. Repeat the action as needed until the part is removed. It is important to work with a cold engine to prevent damage.
Customer Reviews
Customers have been raving about the effectiveness and value of this tool. One customer mentioned that it made the injector removal process a breeze when replacing an injector in their VW Golf TDI. Another customer mentioned the good quality of this tool for its price, and they were able to modify it to suit their specific needs. Many customers have expressed how quickly and easily this tool helped them remove injectors from their vehicles.
the ABN Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover is a reliable and versatile tool for anyone in need of removing stuck fuel injectors. Its durability, compatibility, and ease of use make it a valuable addition to any automotive toolbox.
Product Overview
The ABN Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover w/ M8, M12, M14 Thread Adapter is a versatile and essential tool for removing stuck common-rail diesel injectors quickly and safely. With its durable construction and convenient features, this injector removal tool is designed to make the process of replacing old injectors easier and more efficient.
Efficient Injector Removal
Customers have praised the effectiveness of this tool in removing stubborn injectors. One reviewer mentioned that it only took a few pulls on the slide hammer to remove the injector from their BMW 328d with an N47 diesel engine. Another customer with a Volvo Md 7A engine noted that even with limited space, it only took them four taps to successfully remove the rusted injector. These testimonials highlight the efficiency and reliability of this injector puller tool.
Compatible with Different Injectors
Whether you have Bosch or Lucas injectors, this tool is suitable for both. It comes with M8, M12, and M14 thread adapters, allowing you to easily remove different types of injectors. Customers have attested to its compatibility, with one user confirming that it worked perfectly with the M12 threaded injectors on their N54 motor.
Durable Construction
Constructed from strong and durable steel, this automotive hammer puller tool is designed to withstand the toughest pulling tasks. Its robust steel rod with two threaded ends ensures increased pulling strength and longevity. Customers have expressed satisfaction with the quality and craftsmanship of this tool, noting that the threads are cut well and the overall build is reliable.
Easy to Use
The ABN Diesel Injector Puller Tool is designed for ease of use. To remove the injector, simply attach the tool to the desired injector and yank the weight towards the handle to provide an extra snap of weight to the stuck part. The force transfers to the shaft, pulling the injector in the desired direction. The process can be repeated until the part is successfully removed. It is important to note that this tool should always be used on a cold engine to prevent any damage.
the ABN Diesel Injector Puller Tool with Slide Hammer is a reliable and efficient solution for removing stuck common-rail diesel injectors. With its durable construction, compatibility with various injectors, and ease of use, this tool is a valuable addition to any mechanic’s toolbox.
Features
The ABN Diesel Injector Puller Tool with Slide Hammer is a versatile and durable tool designed to remove stuck common-rail diesel injectors quickly and safely. It eliminates the need to dismantle the cylinder head for injector nozzle cars, making the injector removal process more efficient.
The injector remover kit includes a 1.3-pound shop hammer weight and M8, M12, M14 adapters, providing flexibility and compatibility with various injectors. This allows for easy replacement of old injectors, which are prone to cracks, breaks, and wear due to continuous use.
Symptoms of faulty injectors can range from rough engine idle, slow acceleration, misfires, poor gas mileage, to gas leaks. This fuel injector tool helps to easily remove injectors for testing, cleaning, and replacement, allowing you to address these issues effectively.
The ABN Diesel Injector Puller Tool is particularly useful for Bosch and Lucas injectors. It includes a 7-inch bar and a 1.3 lb slap hammer weight, along with M8, M12, M14 thread adapters. These components are stored in a convenient plastic box for easy storage and travel.
Constructed from strong and durable steel, this automotive hammer puller tool is built to withstand tough pulling applications. Its steel rod with two threaded ends enhances pulling strength and force, ensuring longevity and reliability.
Ease of use is a key feature of this tool. Simply attach the tool to the injector you wish to remove and pull the weight towards the handle in a snapping motion. The force transfers to the shaft, pulling the attached end and injector in the desired direction. Repeat the action until the injector is removed. It is important to always work with a cold engine to avoid any potential damage.
By offering a reliable and efficient solution for removing stuck injectors, the ABN Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover, proves to be an essential tool for any mechanic or DIY enthusiast.
Performance
Easy and Effective Injector Removal
With the ABN Diesel Injector Puller Tool, removing stuck common-rail diesel injectors has never been easier. Weighing in at just 1.3 pounds, this slide hammer tool can quickly and safely remove injectors without the need to dismantle the cylinder head. Our customers have been impressed by the tool’s efficiency, with one reviewer noting that it only took four taps to pull out a rusted injector on their Volvo Md 7A.
Great for Various Brands and Models
This injector remover tool is not limited to a specific brand or model. It is compatible with both Bosch and Lucas injectors, making it a versatile option for many diesel engines. Customers have successfully used this tool on vehicles such as a 2014 BMW 328D with N47 engine and a VW TDI. Whether you need to remove an injector from a BMW or a Volkswagen, this tool is up to the task.
Durable and Long-Lasting Construction
Built with a strong and durable steel, this injector puller tool is designed to withstand even the toughest conditions. The steel rod with two threaded ends provides increased pulling strength and force. This ensures that the tool can effectively remove stubborn injectors from tight positions. Customers have praised the durability of the tool, noting that it held up well even when dealing with rusted injectors.
Simple to Use
The ABN Diesel Injector Puller Tool is designed for ease of use. Simply attach the tool to the injector you wish to remove, and then yank the weight towards the handle to give an extra snap of weight to the stuck part. The force transfers to the shaft, pulling the attached end and injector in the desired direction. Repeat the action until the part is removed. Customers have found this tool to be straightforward and effective, requiring just a few pulls on the slide hammer to remove an injector.
Installation and Usage
Overview
The ABN Diesel Injector Puller Tool with Slide Hammer is designed to quickly and safely remove stuck common-rail diesel injectors without the need to dismantle the cylinder head. This injector removal kit includes a 1.3-pound shop hammer weight and M8, M12, and M14 adapters, making it compatible with various injectors.
Usage Tips
- Before using the tool, ensure that the engine is cold to avoid any damage.
- Attach the tool to the injector that needs to be removed.
- Pull the weight of the slide hammer towards the handle to provide an extra snap of weight to the stuck part.
- The force applied transfers to the shaft and pulls the attached end of the injector in the desired direction.
- Repeat the action until the part is successfully removed.
Customers have praised the ABN Diesel Injector Puller Tool for its effectiveness and quality. One customer stated that the tool worked perfectly for the M12 threaded injectors on their N54 motor. They mentioned that swapping the adapters from one side to the other was the key to successful usage.
Another customer expressed their satisfaction, stating that the tool was perfect for pulling fuel injectors. They had not used it yet but anticipated a positive experience.
One delighted customer shared their experience of successfully removing a badly seized diesel injector using this tool. They were initially unable to remove the injector despite attempts with penetrating oil and manual force. However, after using the ABN Diesel Injector Puller Tool for approximately 20 minutes, the injector came out without any further complications.
An owner of a BMW 328d with an N47 diesel engine praised the tool for its compatibility and ease of use. They were able to remove the injector with just a couple of pulls on the slide hammer.
Our Recommendation
Based on customer feedback and the product’s features, we highly recommend the ABN Diesel Injector Puller Tool with Slide Hammer for its quality construction, versatility, and effectiveness in removing stubborn fuel injectors. Whether you need to replace injectors, test and clean them, or perform maintenance on your diesel engine, this tool can be a valuable addition to your toolbox.
This image is property of Amazon.com.
Great tool for removing stuck injectors
I recently used the ABN Diesel Injector Puller Tool to remove the injectors from my 2014 BMW 328D. The tool fit perfectly with my Bosch injectors and made the removal process a breeze. Even the rusty injector came out easily with a gentle right-left motion and a few slight hammer slide bumps. One important tip is to tape or label the injectors in the order they were removed, as they are coded in the car’s ECU and must be reinstalled in the same hole. I also soaked the injector shafts in a can of Berryman Chem-Dip parts solvent and cleaned the cylinder head seats before reinstalling the injectors. Now, my car’s power is restored, and I am thrilled with the results. Thanks to Liqui Moly Top-Tec oils as well for their contribution to the smooth operation of my engine.
Works well for M12 threaded injectors on N54 motor
For those with M12 threaded injectors on the N54 motor, I can confirm that this tool works efficiently. The trick is to swap the adapters from one side to the other. Both sides of the tool are threaded as M12, but on one side of the shaft, the diameter is reduced to allow the M14 threads to slip over it and thread into the backside of the M12 threads. Once I figured this out, the tool worked perfectly, and the threads were well-cut. I’m pleased with the quality, especially considering the price.
Efficiently removes injectors from VW TDI
I had to remove the injectors from my VW TDI, and this tool made the process quick and easy. The ABN Diesel Injector Puller Tool did its job effectively, allowing me to complete the task without any hassle. I’m satisfied with its performance.
Simplified removal of rusted injector
The ABN Diesel Injector Puller Tool came to my rescue when I encountered a rusted injector on my old Volvo Md 7A engine. Despite having limited space to slide the hammer, the tool only required four taps to pull out the injector. I believe the injector hadn’t fired in a while, which explained the rust. The other injector was clean with just some carbon buildup. I followed the advice of other users and rethreaded the 12mx1.5 threads with a tap on the 12-millimeter side. I’m relieved and pleased that the tool made the removal process so effortless.
Good quality tool with customization options
This ABN Diesel Injector Puller Tool is a great quality tool for its price. It even came with an 8mm .75 pitch thread adapter and other useful adapters. However, I needed an 8mm 1.00 thread pitch for my International Harvester D239 injectors. Fortunately, I was able to purchase a bolt with the required thread and another bolt to match the adapter thread. I welded them head to head, ensuring I had enough thread to put a jam nut on the bolt threading into the injector. This customization made me feel more confident about avoiding any damage to the injector threads. In the end, the tool performed as expected, and I was able to successfully remove the injectors, even pulling out the stuck injector cup in the process.
Pros and Cons
Pros
- Ease of Use: Customers have praised the ABN Diesel Injector Puller Tool with Slide Hammer for its ease of use. They found it simple to attach the tool to the injector and apply the necessary force to remove it. Users were able to remove stubborn injectors quickly and efficiently.
- Effective Removal: Many reviewers have shared success stories of removing stuck injectors using this tool. They have mentioned that the slide hammer and adapters provided in the kit were effective in pulling out the injectors, even in challenging situations such as rusted or seized injectors.
- Versatility: The ABN Diesel Injector Puller Tool comes with M8, M12, and M14 thread adapters, making it compatible with various injector sizes. Customers have praised the tool’s versatility, as it can be used on different injectors, including Bosch and Lucas injectors.
- Durable Construction: Made of strong and durable steel, this tool is built to withstand the rigors of injector removal. Customers have appreciated the sturdiness of the tool, noting that it is capable of handling tough pulling tasks.
- Value for Money: Users have found the ABN Diesel Injector Puller Tool to be a good investment. They believe that the tool offers great value for its affordable price, considering its effectiveness and durability.
Cons
- Size Limitations: One user mentioned that they would have preferred a larger tool with a heavier slide hammer for more challenging projects. However, this was a specific requirement and may not be a disadvantage for everyone.
- Thread Compatibility: While the tool comes with adapters for various thread sizes, one customer had to purchase additional bolts and modify them to fit their specific injector. This extra step may be necessary for certain injector types.
the ABN Diesel Injector Puller Tool with Slide Hammer has received overwhelmingly positive reviews from customers. Its ease of use, effectiveness, versatility, and durable construction make it a useful tool for removing stubborn injectors. While there may be some minor limitations, overall, this tool offers great value for money.
Conclusion
After reviewing the ABN Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover with M8, M12, M14 Thread Adapter, we can confidently say that this tool is a must-have for any automotive enthusiast or professional mechanic.
This injector removal tool is designed to quickly and safely remove stuck common-rail diesel injectors without the need to dismantle the cylinder head. With a 1.3-pound shop hammer weight and M8, M12, M14 adapters, this tool provides the necessary force to remove even the most stubborn injectors.
Customers who have used this tool have praised its effectiveness and ease of use. One customer who used it to replace an injector on a BMW 328d with an N47 diesel engine mentioned that it only took a couple of pulls on the slide hammer to remove the injector. Another customer confirmed that the tool worked perfectly for removing M12 threaded injectors on the N54 motor.
The durability of this tool is also worth noting. Made of strong and durable steel, it is capable of pulling even the toughest fuel injectors from tight positions. The metal construction not only provides increased pulling strength but also ensures the longevity of the tool.
Overall, the ABN Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover with M8, M12, M14 Thread Adapter is a high-quality, affordable tool that is essential for removing diesel injectors. Whether you are a DIY enthusiast or a professional mechanic, this tool will make the task of injector removal much easier and more efficient.